Downloads read more ...
DYNA Force® Elasto Magnetic Sensor,
Filesize: 1.5 MB
Filesize: 1.5 MB
DYWIDAG Multistrand Stay Cable Systems,
Filesize: 3.7 MB
Filesize: 3.7 MB

- Manufacture of corrosion protection tape

- Adhesion of the tape on cable surface

- Automatic application of the corrosion protection system
DYWIDAG Corrosion Protection System DYNA Protect®
Advantages of the Corrosion Protection System DYNA Protect®
The corrosion protection system DYNA Protect® provides the design engineer and the owner with the possibility to easily and permanently protect tension members against corrosion.
In particular, the following advantages are evident:
- Applicable with new tension members or with tension members that are already in use
- Based on the DENSO corrosion protection technology that has been successful for decades
- Meets the demands of the TL/TP-KOR-cables/RKS-cables bulletin, proved during tests at the material testing institute of the University of Stuttgart
- Quality assurance according to DIN EN ISO 9001
- Robust multi-layer system with a layer thickness of at least 2,6 mm
- Elastic properties which can support deformations of the tension member without damages
- Any irregularities in the surface of the tension member are filled
- Good adhesion of the corrosion protection tape on the surface of the tension member
- Positive impact on the behavior of tension members in rain-wind-induced vibrations, achieved through helical application of the corrosion protection tapes
- Surface available in different colors
- Simple and competitive assembly through the wrapping method especially developed for this purpose
- No enclosure, scaffolding or other equipment such as working platforms or lifts are required
- Short assembly time as no waiting time and curing time must be respected between the application of the several layers
- Widely independent of weather conditions during assembly. A dry surface is the only precondition
- Ecologically friendly assembly due to the omission of blasting works
- No flaking or tearing of the wrapping, e.g. after a possible emission of cable filler at full locked cables or at relative displacements between single wires of the cable
- Easy visual control for damages on the corrosion protection surface
- Damages can easily be repaired by wrapping an additional layer of tape
- Little maintenance efforts



