DSI demonstrates its technical Competence during Repair Work on the Talmadge Bridge
The Talmadge Memorial Bridge is a four lane, cable stayed bridge in the state of Georgia, USA carrying US route 17 through Downtown Savannah across the Savannah River to Hutchinson Island. There are two pairs of H-shaped pylons supporting the stay cables. The main span of the bridge that was completed in 1991 is 335m (1,100ft) long, and the overall bridge length is 3.1km (1.9mi).
In the summer of 2015, DSI was contracted by the General Contractor, The Industrial Company (TIC), to perform important component repairs to the Talmadge Memorial Bridge. As with all bridges, periodic repair and maintenance is needed to keep the structure in good condition, and this was the second time DSI’s expertise was called upon for the repair work. DSI had already supplied and installed 288 retrofit dampeners on the Talmadge Bridge cables between 2006 and 2008.
The scope of DSI’s second contract was to replace all the stay cable boot seals at the pylons and underneath the bridge deck. Furthermore, DSI renewed the cable stay pipe tape where the existing tape had sustained damage. The contract also included the inspection and repair of all the anchorage caps on the stay cables – both at the lower anchor locations below the bridge deck and at the upper anchor locations in the pylons. The anchor cap repairs included installing new seals, packing the caps with new corrosion inhibiting compound and replacing anchor bolts as required.
Access was the most challenging component of this repair program and required the utmost attention to detail. DSI provided a total of 4 man baskets for access to the upper boot locations. Each basket was individually controlled with a safety spotter to ensure safe movement up and down the pylon exteriors.The repair work on the Talmadge Bridge was completed safely, on time and on budget in February 2016.